Remap F1 and F2 Keys to Up and Down on Intermec CK3 Series Handhelds.

To remap F1 and F2 keys follow the steps below:

1. On the handheld, open Internet Explorer
2. Navigate to http://bit.ly/intkbrup 
3. Accept the download. Make sure “Open file after download” is checked
4. The installer will start, accept all defaults.
5. Once the installer is finished, open the Start menu and navigate to Settings > System > Keyboard Remapper
6. In the “Physical Key” drop down, select “<F1> Key”
7. In the “Key Value” drop down, select “<Up>” (it should be about 3/4 of the to the bottom of the list)
8. Click the “Add Key Definition” button
9. In the “Physical Key” drop down, select “<F2> Key”
10. In the “Key Value” drop down, select “<Down>” (it should be about 3/4 of the to the bottom of the list)
11. Click the “Add Key Definition” button

You can use these remapping steps to remap any key to another value.